Audio / Video

Canned Smoke For Detector Testing

Sun, 20 May 2012 00:57:28 +0000

Canned smoke allows you to meet fire system test requirements without contaminating the smoke detector. The unique formula does not effect detector sensitivity or increase the risk of false alarm. The smoke is non-toxic and dissipates quickly allowing you to test multiple detectors easily. Suitable for photoelectric or ionisation type smoke detectors.

SKU: T3100

$19.95 As low as: $18.90

60cm RJ11 to RCA Plug Lead

Sun, 20 May 2012 00:57:28 +0000

60cm RJ11 to RCA Plug Lead

SKU: P7100

$3.20 As low as: $2.90

1m RJ12 to 3.5mm mono Plug Modular Lead

Sun, 20 May 2012 00:57:28 +0000

3.5mm plug to RJ12 6P6C modular

SKU: P7061

$3.40 As low as: $3.05

Telephone Line Isolation Universal

Sun, 20 May 2012 00:57:28 +0000

By law any radio, amplifier etc connected to a telephone system (for background music or paging applications) must be isolated with a line isolation unit (LIU). Adjustable output level suits all telephone systems. Supplied with 3.5mm mono to RJ11 input lead. Output leads sold separately to suit your application.

SKU: A0642

$32.00 As low as: $28.77

NEW! 30W Ribbon Tweeter Rectangular

Sun, 20 May 2012 00:57:28 +0000

Ribbon tweeters offer a wide operating frequency response. This is no exception with the C 6220
which has an almost flat response curve from 2.5kHz to 40kHz. Ideal for use in a 2/3 way speaker system. Offers superb transient & response times.

Specifications:

Rated power: 30W
Max power: 80W
Impedance: 8 ohm
Freq response: 2.5kHz - 40kHz
SPL 1W @ 1m: 96dB
Nett weight: 520g
Overall dimensions: 175 x 90mm
Cutout dimensions: 158 x 73mm
Mounting depth: 13mm

SKU: C6220

$84.95

NEW! 15W Ribbon Tweeter Round

Sun, 20 May 2012 00:57:28 +0000

Offering a rich, distortion free reproduction, and a frequency response of 3kHz to 40kHz, this tweeter is suitable for hi-fi or home theatre use.

Specifications:

Rated power 15W
Max power: 30W
Impedance: 4 Ohm
Freq response: 3kHz - 40kHz
SPL 1W @ 1m: 90dB
Nett weight: 885g
Overall diameter: 110mm
Cutout diameter: 80mm
Mounting depth: 36mm

SKU: C6212

$39.95

Horn Flare For C 6110/C6154

Sun, 20 May 2012 00:57:28 +0000

This plastic horn flare fits the C 6110 and other industry standard compression or piezo drivers.
Dimensions:
Cutout: 115H x 160W mm
Flare: 155H x 194W mm

SKU: C6130

$19.95

75W PA Compression Driver

Sun, 20 May 2012 00:57:28 +0000

For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. Standard 1” throat.

Specifications

Rated power: 75W
Max power: 150W
Impedance: 8 Ohm
Freq response: 800Hz-20kHz
Sensitivity 1W @ 1m: 110dB
Voice coil diameter: 51.2mm
Magnet weight: 1132g

SKU: C6115

$69.95

Compression Driver 34mm 30W

Sun, 20 May 2012 00:57:28 +0000

This super-high efficiency compression driver is perfect for PA use. It has an industry standard mounting thread, aluminium voice coil former and titanium diaphragm. Fits the C 6130 horn flare and other horns with industry standard throat.

Specifications

Rated power: 30W RMS
Max power: 60W
Impedance: 8Ω
Freq response: 1.5kHz-20kHz
Sensitivity 1W @ 1m: 103dB
Voice coil diameter: 34.5mm
Magnet weight: 567g

SKU: C6110

$49.95

Outdoor All Weather Granite Look Rock Speaker Pair 25W

Sun, 20 May 2012 00:57:28 +0000

Extend your home audio system to the outdoors with this granite look rock speaker. Constructed from moulded fibreglass the finish is remarkably realistic. Fitted with a 5.25” 2-Way coaxial driver it is ideal
for background music when entertaining. The sealed enclosure and weatherproof driver allow permanent
installation in garden beds, planters, shadehouses etc. Sold in pairs.

Specifications:

Impedance: 8Ω
Rated power: 25W RMS, 50W max
SPL 1W @ 1m: 86dB
Freq response: 100Hz - 20kHz
Weight: 3kg
Dimensions (mm): ≈230W x 250H x 210D

SKU: C5505

$199.00

Surround Sound - Satellite Speakers

Sun, 20 May 2012 00:57:28 +0000

These compact, lightweight speakers punch an unbelievable sound for their size. Mounted in an injected moulded ABS housing the 3.5" mid bass driver delivers clear smooth sound which is complemented by the centrally mounted tweeter. The cabinet which is modest in size measuring a meagre 110W x 130H x 130D is excellent for rear speakers in a surround sound system or for satellite speakers when used with a hifi system. In fact when used with a powered subwoofer most people will not believe the performance of these speakers. They would be perfect for the games room, small boutique, restaurant etc.

C 5280 can be wall mounted using a wacki H 8010/2 and a H8025 adaptor.

Specifications:

Rated power: 15W
Max power: 30w
Frequency response: 110 — 20KHz
Impedance: 8 Ohm
Sensitivity: 84dB 1W / 1M
Dimensions: 110W x 130H x 130D mm

SKU: C5280

$89.00

Centre Channel for Home Theatre

Sun, 20 May 2012 00:57:28 +0000

An important part of any surround sound system is the centre speaker. This is the speaker that primarily reproduces movie dialogue and as such must be mounted as close as possible to the TV screen.This centre speaker is compact, stylish and performs extremely well. It is fitted with two 3.5" drivers with a 1" dome tweeter.All speakers are magnetically shielded.

Specifications:

Rated power: 15W
Max power: 30w
Frequency response: 110 — 20KHz
Impedance: 4 Ohm
Sensitivity: 85dB 1W / 1M
Dimensions: 320W x 120H x 150D mm

SKU: C5250

$99.00

NEW! Subwoofer for Home Theatre With Remote (10")

Sun, 20 May 2012 00:57:28 +0000

Subwoofer: This new upgraded model includes remote control for easy bass level & frequency adjustment from the comfort of your couch! Sure to add brilliant “bottom end” bass reproduction to any home theatre or hi-fi system. Very compact considering the high spec 10 inch 120W bass driver employed. The inbuilt amp accepts either a speaker or a line level input. When configured for speaker line input the satellite speakers are cabled from the amplifier via “loop through” terminals. The front panel includes adjustable level control, crossover frequency and a phase reversal switch. Auto sensing circuit switches the amplifier on when an input signal is detected. A must for the serious movie buff or hi-fi enthusiast. Sold individually.

Specifications

Impedance: -
Rated power: 120W RMS Active
Freq response: 40Hz - 20kHz
Dimensions (mm): 490D x 315W x 420H

SKU: C5201

$399.00

81 x 57mm Plastic Speaker Box Corner

Sun, 20 May 2012 00:57:28 +0000

Protect your speaker cabinets with these quality corners Simply screws over the cabinet. Requires no cutting.

SKU: C3623

$1.70

Speaker Woofer 12" Hi-Power 200W

Sun, 20 May 2012 00:57:28 +0000

This bass driver is manufactured using an exotic neodymium magnet providing a huge power handling to weight ratio. It also features a massive 2.5" voice coil and 400W maximum power handling for serious PA applications. Great for quad boxes, W-bins, folded horns, foldback wedges, DJ speakers and more.

Specifications:

?Rated power: 200W RMS
Max power: 400W
Impedance: 8O
Freq response: 44Hz-5.5kHz
Resonant frequency: 44Hz
Vas: 121.7L
Qes: 0.375
Qms: 4.4
Qts: 0.346
Sensitivity 1W @ 1m: 97dB
Voice coil diameter: 65.5mm
Nett weight: 2kg
Cutout diameter: 280mm
Mounting depth: 130mm

Recommended Box Size (1 Speaker):
50L Box
100mm dia. x 75mm L port

SKU: C3212

$149.00

100mm (4") Midrange

Sun, 20 May 2012 00:57:28 +0000

A fully sealed 4 inch midrange speaker with doped paper cone and long lasting rubber surround.

Specifications:

Input power: 30W
Max input power: 50W
Impedance: 8Ω
Sensitivity: 89dB 1W, 1m
Resonant frequency: 450Hz
Frequency response: 280Hz-12KHz
Voice coil diameter: 20mm
Cutout diameter: 97mm
Mounting depth: 47mm

SKU: C3017

$21.95

20W Mylar Dome Tweeter Speaker

Sun, 20 May 2012 00:57:28 +0000

A compact polymer dome tweeter for use in bookshelf or satellite/surround speakers. Features dispersion vanes for even sound field distribution.

Specifications:

Rated Input Power: 15W
Max Power Input: 30W
Impedance: 8Ω
Frequency Resp.: 4kHz - 20kHz
Sensitivity (1w @ 1m): 88dB
Voice Coil Diameter: 19.4mm
Nett Weight: 78g
Overall Diameter: 73mm
Cutout Diameter: 50mm
Mounting Depth: 17mm

SKU: C3010

$12.50

50W Shielded Tweeter Speaker

Sun, 20 May 2012 00:57:28 +0000

Magnetically shielded ferro-fluid tweeter specifically for use in high performance speaker systems. Ideal for use in Home Theatre front of house and centre speakers. Will not affect television screens.

Specifications:

Rated Input Power: 30W
Max Power Input: 50W
Impedance: 8Ω
Frequency Resp.: fo-20kHz
Resonant Frequency: 1000Hz
Sensitivity (1w @ 1m): 90dB
Voice Coil Diameter: 25.4mm
Nett Weight: 480g
Magnet Weight: 181g
Overall Diameter: 100mm
Cutout Diameter: 78mm
Mounting Depth: 33mm

SKU: C3005A

$24.95

Speaker "One-Shot" Low Profile 5W EWIS

Sun, 20 May 2012 00:57:28 +0000

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs.

Please refer to our online brochure for more detailed specifications on this product.

SKU: C2150

$39.00

30W Horn Weather Proof 100V Music Speaker

Sun, 20 May 2012 00:57:28 +0000

A unique innovation in horn speakers. A combination of re-entrant low/mid driver with a high frequency loaded horn culminates in breath taking clarity and sound pressure level for relatively wide range reproduction. It is eminently suited to outdoor applications where a very high standard of speech and music reproduction is demanded eg: schools gymnasiums, aquatic centres, sporting arenas, stadiums, railway stations etc. Adjustable power setting is included. The speaker is weather resistant, incorporates an aluminum mounting bracket and has an IP65 rating. Manufactured from high impact ABS plastic.

Features:

Unique combination re-entrant horn and high frequency driver
Tough ABS construction
Aluminium mounting bracket
IP65 Weatherproof Construction
Selectable 100V line power taps 3.75, 7.5W, 15W & 30W
High efficiency drivers and transformer

Specifications:

Power Rating: 30W RMS
Power Taps (100V): 30/15/7.5/3.75
SPL 1W @ 1m: 98dB
Freq. Response: 65Hz - 16.5kHz
Dimensions: 442W x 260H x 288D mm
Colour: Grey
Weight: 12kg

SKU: C2077

$329.00

Horn Driver Unit 100V 60W

Sun, 20 May 2012 00:57:28 +0000

Flare ONLY

Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designed to be fitted with a compression driver. Rated to IP66 and supplied with stainless steel mounting bracket & fixings, making it suitable for permanent outdoor installations.

SKU: C2064

$149.00

Horn Driver Unit 100V 40W

Sun, 20 May 2012 00:57:28 +0000

SKU: C2063

$129.00

21" Flare to suit C 2063/64

Sun, 20 May 2012 00:57:28 +0000

SKU: C2062

$119.00

40W Horn 100V High Efficiency Speaker

Sun, 20 May 2012 00:57:28 +0000

This high performance horn speaker boasts a massive SPL of 128.5 dB at 40 Watts providing high forceful and effective sound penetration making it well suited to very noisy installations. The horn is IP65 rated and is constructed from heavy duty ABS.The sturdy mounting bracket is powdercoated and secured with nickel-chromium plated mild steel bolts. Power taps are selected via the inbuilt selector switch. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker.

Specifications:

Power Taps: 5, 10, 20, 30 & 40W
SPL 1W @ 1m: 112.5dB
IP Rating: IP65
Freq. Response: 180Hz - 7kHz
Flare Size: 400 x 200 x 450 mm
Weight: 3.9kg

SKU: C2059

$170.00

8 Ohm 8" 10W Dual Cone PA Speaker

Sun, 20 May 2012 00:57:28 +0000

Designed primarily for PA and background music applications. Magnet includes transformer mounting holes at 51mm.
Diagonal mounting hole centres at 195mm.

Specifications:

Input Power: 5 Watts RMS
Max Input Power: 10 Watts
Impedance: 8Ω
Resonant Frequency: 80Hz
Frequency Response: 80Hz - 18kHz
SPL (1w @ 1m): 92dB

SKU: C2000A

$14.45

Mounting Bracket to Suit C 1221

Sun, 20 May 2012 00:57:28 +0000

Mounting Bracket

SKU: C1221

$295.00

High Power Active Line Array Speaker System

Sun, 20 May 2012 00:57:28 +0000

A high-power active line array specifically designed for use for large PA applications such as clubs, concert venues, amphitheatres etc. In keeping with their professional PA application, the cabinets are manufactured from rugged 9-ply birch laminate plywood finished with hard-wearing black lacquer and steel grilles. The twin 12” bass unit contains a built-in fan-cooled high power amplifier and adjustable active crossover for fine tuning the system output. The four mid/high cabinets each contain twin 6.5” drivers and two 2” PA tweeters and have a variable vertical angle adjustment with locking pins for tailoring the sound coverage to suit the venue. May be hung from a speaker rig using the built-in hardpoints or mounted to a ceiling with the C 1221 bracket. Multiple units may be daisy chained together to form an even larger PA system. Supplied as a complete system, with active subwoofer cabinet and four mid/high cabinets, in two sturdy flight cases with wheels.

Specifications:

Subwoofer amplifier power: 2 x 350W RMS
Line array amplifier power: 2 x 350W RMS
Input sensitivity: 0.775V
Inputs: 1 x balanced 3 pin XLR
Outputs: 2 x Speakon (to mid/high cabs)
1 x balanced 3 pin XLR (for daisy chain)
1 x 240V power connector (for daisy chain)
High pass tuning: 80 - 200Hz -3dB
Low pass tuning: 50 - 250Hz -3dB
Bass Speaker
Impedance: 4Ω
Input power: 700W RMS, 1400W max
Frequency response: 30Hz - 250Hz
SPL: 101dB 1W@1m
Size: 404H x 548W x 852D
Weight (in flight case): 97kg
Mid/High Speaker (4 cabinets)
Impedance: 8Ω
Input power: 175W RMS, 350W max
Frequency response: 80Hz - 15kHz
SPL: 97db 1W @ 1m
Dispersion angle: 90° horiz, 15° vert
Suspension angle: 0° - 15°
Dimensions: 180H x 548W x 324D
Weight (in flight case): 85kg

SKU: C1220

$7,495.00

120W Ball Ceiling 100V Flush

Sun, 20 May 2012 00:57:28 +0000

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications.
Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 200mm (8") coaxial
Power Taps: 20, 40, 80 & 120W
SPL 1W @ 1m: 94dB,
Frequency Resp.: 40Hz - 19kHz, ±6dB
Coverage: 180° Vertical, 360° Horizontal
Weight: 9.7kg
Material: Fibreglass
Dimensions: 510W x 490H mm

SKU: C1085

$1,395.00

55W Ball Ceiling 100V Flush

Sun, 20 May 2012 00:57:28 +0000

Specifications:

Driver Size: 200mm (8") coaxial
Power Taps: 14, 27 & 55W
SPL 1W @ 1m: 92dB,
Frequency Resp.: 60Hz - 16kHz, ±6dB
Coverage: 180° Vertical, 360° Horizontal
Weight: 8.9kg
Material: Fibreglass
Dimensions: 510W x 480H mm

SKU: C1080

$995.00

Ball Ceiling Mount Bracket Speaker

Sun, 20 May 2012 00:57:28 +0000

Flush mount ceiling bracket for C 1070

SKU: C1075

$55.00

35W 100V Ball Ceiling Speaker

Sun, 20 May 2012 00:57:28 +0000

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications. Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 165mm (6.5") coaxial
Power Taps: 7, 15 & 35W
SPL 1W @ 1m: 92dB
Frequency Resp.: 80Hz - 16kHz, ±6dB
Coverage: 180° Vertical, 360° Horizontal
Weight: 4kg
Material: Structural Polystyrene
Dimensions: 380W x 290H mm

SKU: C1070

$289.00

30W 100V Ball Pendant Speaker

Sun, 20 May 2012 00:57:28 +0000

Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. This model is fitted with a high efficiency 165mm (6.5") twin cone 30W driver, 100V line transformer and features IEC529 IP35 water protection.

Specifications:

Power Taps: 8Ω, 5, 10, 15, 20, 30W
SPL 1W @ 1m: 91dB
Freq. Resp.: 100Hz - 20kHz
Weight: 3kg
Colour: White
Material: ABS Plastic
Cable Length: 5M
Overall Diam.: 260mm approx.

SKU: C1055

$160.00 As low as: $150.06

100V 15W Ball Pendant Speaker

Sun, 20 May 2012 00:57:28 +0000

Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. This model is fitted with a high efficiency 133mm (5.25") twin cone 15W driver and a 100V line transformer.

Specifications:

Power Taps: 5, 10 & 15 W
SPL 1W @ 1m: 90dB
Freq. Resp.: 80Hz - 20kHz
Weight: 1.8kg
Colour: White
Material: ABS Plastic
Cable Length: 4M
Overall Diam.: 190mm approx.

SKU: C1050

$112.00

Speaker Pro PA 3W 18/8" 500W RMS

Sun, 20 May 2012 00:57:28 +0000

The Biema Stage Series Professional Speakers are engineered for 'Front of House' use in commercial PA systems. They are built tough to cope with the rigours of touring or permanent venue installations. The cabinets are manufactured using the latest CNC machinery ensuring a world-class finish. They are painted with a tough, durable, long-lasting coating to ensure many years of service. The drivers have been carefully chosen to provide massive power handling, superb frequency response and high efficiency. They are the perfect partner to the Biema audio power amplifiers.

Incorporating a massive 18" bass driver, this three way system is the perfect 'full range' solution for commercial systems.
It features a sealed midrange enclosure and horn tweeter. The enclosure is a trapezoidal section bass reflex design, providing extended bass response and minimising standing waves within the cabinet. Fitted with loop in/out industry standard 4 pin speaker connectors.

Specifications

Input power: 500W continuous, 1000W peak
Impedance: 8Ω
Freq response: 35Hz-19kHz
SPL 1W @ 1m: 96dB
Max SPL: 128dB
Dispersion: 90° Horizontal, 70° Vertical
Dimensions: 1100H x 530W x 530D
Weight: 60kg

SKU: C1038

$999.00

Speaker Pro PA 3W 15/6" 400W RMS

Sun, 20 May 2012 00:57:28 +0000

The Biema Stage Series Professional Speakers are engineered for 'Front of House' use in commercial PA systems. They are built tough to cope with the rigours of touring or permanent venue installations. The cabinets are manufactured using the latest CNC machinery ensuring a world-class finish. They are painted with a tough, durable, long-lasting coating to ensure many years of service. The drivers have been carefully chosen to provide massive power handling, superb frequency response and high efficiency. They are the perfect partner to the Biema audio power amplifiers.

A classic 3-way front of house system incorporating a 15" bass driver, sealed midrange enclosure and horn tweeter. The enclosure is a trapezoidal section bass reflex design, providing extended bass response and minimising standing waves within the cabinet. Fitted with loop in/out industry standard 4 pin speaker connectors.

Specifications

Input power: 400W continuous, 800W peak
Impedance: 8Ω
Freq response: 45Hz-19kHz
SPL 1W @ 1m: 97dB
Max SPL: 126dB
Dispersion: 90° Horizontal, 70° Vertical
Dimensions: 880H x 500W x 500D
Weight: 36kg

SKU: C1036

$799.00

12" 600W RMS 2 Way Speaker

Sun, 20 May 2012 00:57:28 +0000

With a wide frequency response, high power handling and high efficiency, these rugged two way
speakers are designed for the rigours of PA hire or band use. They are the perfect partner for the C 1049 18” active subwoofer unit and are equally at home when used as full-range speakers. The wedgeshaped design minimises internal acoustic reflections. Fitted with carry handles, standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power: 600W RMS
Impedance: 8Ω
Freq response: 60Hz-18kHz
SPL: 99dB 1W@1m, 129dB Max
Dimensions: 650H x 420W x 400D
Weight: 32kg

SKU: C1031

$929.00

Speaker Pro PA 2Way 12" 450W RMS

Sun, 20 May 2012 00:57:28 +0000

Intended for top-line, high power PA systems, this speaker consists of a powerful 12” bass driver and a compression driver tweeter in a rugged bass reflex enclosure. It may be installed as floor standing, suspended, or mounted on a speaker stand. The huge bass driver has a solid die-cast magnesium frame with massive magnet and heavy duty cone suspension system. The enclosure
is manufactured from solid plywood and is fitted with heavy duty internal steel bracing to eliminate flexing under high input power conditions. The cabinet is internally coated with a special acoustic material for optimum damping. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (RMS): 450W
Peak power: 900W
Impedance: 8Ω
Freq response: 60Hz-18kHz
SPL 1W @ 1m: 97dB
Max SPL: 127dB
Dimensions: 640H x 400W x 388D
Weight:37kg

SKU: C1030A

$999.00

10" 300W RMS 2 Way Speaker

Sun, 20 May 2012 00:57:28 +0000

Specifications:

Input power: 300W RMS
Impedance: 8Ω
Freq response: 80Hz-18kHz
SPL: 97dB 1W@1m, 122dB Max
Dimensions: 510H x 310W x 320D
Weight: 15.5kg

SKU: C1029

$515.00

Biema 150W 8" Two Way Speaker

Sun, 20 May 2012 00:57:28 +0000

A high power two-way 8” speaker system superb for foreground music applications eg as music fill in pubs or bars. The sound reproduction is loud, clear and punchy. The stylish cabinet is both aesthetically pleasing and physically robust. May be permanently wallmounted or installed on a speaker stand via theinbuilt top hat. Fitted with standard 4 pin speaker socket.

Specifications:

Input power (continuous): 150W RMS
Impedance: 4Ω
Freq response: 100Hz-18kHz
SPL 1W @ 1m: 97dB
Max SPL: 119dB
Dimensions: 420H x 272W x 250D
Weight: 7.5kg

SKU: C1026

$395.00

Biema 150W 2 x 8" Two Way Speaker Black

Sun, 20 May 2012 00:57:28 +0000

This series of Biema 2-way full range speakers has been engineered using the most advanced
acoustic design software. The trapezoid shaped plywood cabinets have been specially treated
with an acoustic damping coating to improve their performance. Each completed unit is subject to a 5 hour “running in” test. The cabinets’ trapezoidal cross section allows installation in either wall or ceiling mount applications. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (continuous): 150W RMS
Input power (peak): 300W
Impedance: 4Ω
Freq response: 60Hz-20kHz
SPL 1W @ 1m: 93dB
Max SPL: 118dB
Dimensions: 695H x 275W x 280D
Weight: 13.5kg

SKU: C1025

$429.00

Biema 150W 2 x 8" Two Way Speaker White

Sun, 20 May 2012 00:57:28 +0000

Specifications:

Input power (continuous): 150W RMS
Input power (peak): 300W
Impedance: 4Ω
Freq response: 60Hz-20kHz
SPL 1W @ 1m: 93dB
Max SPL: 118dB
Dimensions: 695H x 275W x 280D
Weight: 13.5kg

SKU: C1024

$429.00

Biema 120W 2 x 6.5" Two Way Speaker

Sun, 20 May 2012 00:57:28 +0000

Specifications:

Input power (continuous): 120W RMS
Input power (peak): 240W
Impedance: 4Ω
Freq response: 70Hz-20kHz
SPL 1W @ 1m: 93dB
Max SPL: 117dB
Dimensions: 620H x 220W x 222D
Weight: 9.9kg

SKU: C1022

$375.00

Biema 360W 15" Active Subwoofer

Sun, 20 May 2012 00:57:28 +0000

Powered by an internal amplifier, this 15” active subwoofer provides deep sub bass for PA speaker systems. The heavy duty bass reflex cabinet makes it perfect for band PAs or DJs. Equally at home in fixed or mobile PA systems.

Features adjustable output level and low-pass filter point.

Specifications:

Output power: 360W RMS, 800W Max
Impedance: 4Ω
Freq response: 35Hz-500Hz
Low pass adjustment: 50-500Hz
SPL: 99dB 1W@1m, 127dB Max
Dimensions: 670H x 445W x 365D
Weight: 29kg

SKU: C1015

$869.00

15" 2 Way PA Bin Speaker

Sun, 20 May 2012 00:57:28 +0000

Available in sizes from 10” to 15”, these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind the cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.
Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting. Floor stands are also provided for the 12” (C 1004A) and 15” (C 1008A) models, allowing the speakers to be side mounted when used in foldback applications. 4 inbuilt rigging points allow the units to be suspended using eye bolts.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

Features:

Rugged moulded ABS construction
Cast aluminium frame bass driver
High performance large voicecoil diameter
Wide frequency response
Titanium diaphragm compression driver

Specifications:

Rating: 250W (RMS)
Impedance: 8 Ohm
SPL (1W @ 1m): 97dB
Frequency Resp: 40Hz - 20kHz
Dimensions: 430 x 355 x 685mm
Weight: 26.5kg

SKU: C1008A

$499.00

12" 2 way PA Bin Speaker

Sun, 20 May 2012 00:57:28 +0000

Features:

Rugged moulded ABS construction
Cast aluminium frame bass driver
High performance large voicecoil diameter
Wide frequency response
Titanium diaphragm compression driver

Specifications:

Rating: 200W (RMS)
Impedance: 8 Ohm
SPL (1W @ 1m): 95.5dB
Frequency Resp: 40Hz - 20kHz
Dimensions: 430 x 310 x 580mm
Weight: 17.5kg

SKU: C1004A

$389.00

SPK PRO PA 2WAY 10"

Sun, 20 May 2012 00:57:28 +0000

Housed in rugged wedge shaped nylon fibre and ABS moulded cabinets these speakers are designed with portability in mind. The cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.

Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

4 inbuilt rigging points allow the unit to be suspended using eye bolts.

Features:

Rugged moulded ABS construction
Cast aluminium frame bass driver with large voice coil diameter
Inbuilt top hat mount and carry handle
Wide frequency response
Titanium diaphragm compression driver
4 rigging points

Specifications:

Rating: 150W (RMS)
Impedance: 8 Ohm
SPL (1W @ 1m): 96.5dB
Frequency Resp: 50Hz - 17kHz
Dimensions: 335 x 260 x 472mm
Weight: 12kg

SKU: C1000A

$275.00

Speaker Pro PA 2 Way 8" 100W RMS

Sun, 20 May 2012 00:57:28 +0000

Features:

Specifications:

Rating: 80W (RMS)
Impedance: 8Ω
SPL (1W @ 1m): 89dB
Frequency Resp: 50Hz - 17kHz
Dimensions: 282 x 213 x 393mm
Weight: 12kg

SKU: C0996A

$165.00

Biema 35W 2 Way Reflex Full Range Speaker Black

Sun, 20 May 2012 00:57:28 +0000

Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic design software, they are fitted with a
unique mounting bracket, making installation a breeze.

Specifications:

Input power (continuous): 35W RMS
Impedance: 8Ω
Freq response: 80Hz-18kHz
SPL 1W @ 1m: 86dB
Max SPL: 104dB
Dimensions: 285H x168W x 155D
Weight: 3.6kg

SKU: C0988

$125.00

Biema 35W 2 Way Reflex Full Range Speaker White

Sun, 20 May 2012 00:57:28 +0000

Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic design software, they are fitted with a unique mounting bracket, making installation a breeze.

Specifications:

Input power (continuous): 35W RMS
Impedance: 8Ω
Freq response: 80Hz-18kHz
SPL 1W @ 1m: 86dB
Max SPL: 104dB
Dimensions: 285H x168W x 155D
Weight: 3.6kg

SKU: C0966

$125.00

60W 100V Black Speaker Column

Sun, 20 May 2012 00:57:28 +0000

High performance speech and music speakers for commercial sound applications

Redback sound columns are constructed from a unique proprietary aluminium extrusion. UV stabilised Luran 'S' end caps are fitted. Speaker drivers are secured to a marine grade ply baffle board. The overall design and construction criteria ensure good looks and long service life in harsh outdoor applications including direct sunlight. Included are aluminium mounting brackets and stainless steel fixings. The brackets enable both horizontal and vertical adjustments. 40W and 60W models available in either white or black

The drivers have been chosen for wide range, low distortion, mid range “presence” (essential for high grade vocal work) and high efficiency in general. Acoustic wadding is used to dampen Bass resonance. The directional characteristics of Redback sound column speakers eminently suit them to indoor applications such as Halls, Shopping Centres, Air Terminals, Churches, Gymnasiums, Squash Courts and 1000 and 1 other applications. Sound columns are especially helpful in overcoming reverberation echo and microphone “feed back” or whistle. When mounted vertically the REDBACK sound columns can be “focused” to provide an even sound pressure level from front to rear of audience.

Features:

Rugged extruded aluminium construction
Superb black or white industrial grade powder coat paint finish
Engineer designed in Australia
Excellent reproduction
Superior to imports - yet a fraction of the price
All exterior fixings marine grade stainless steel
Speaker cones treated with special formula to repel moisture

Specifications:

Type: 100V line
Power taps: 10, 20, 30, 60W
Dimensions: 770H x 150W x 155D mm
Colour: Black

Connection Details:

Supplied with multi-core cable connected to the various power taps of the transformer.
Simply connect between common and the required power tap.
Output cable allows connection to 10, 20, 30 or 60W power taps.
Supplied with Two Mounting Brackets Enabling Adjustment Both Vertically and Horizontally

SKU: C0962

$375.00 As low as: $350.53